| No. | Brand | b | h | s | F | a | T | L | J |
| NU-2310E M C/3 | CONSOLIDATED BEARING | - | - | - | - | - | - | - | - |
| NJ-306E M C/3 | CONSOLIDATED BEARING | - | - | - | - | - | - | - | - |
| 6208 M P/6 | CONSOLIDATED BEARING | - | - | - | - | - | - | - | - |
| 23220E M C/3 | CONSOLIDATED BEARING | - | - | - | - | - | - | - | - |
| 6304-ZZ | CONSOLIDATED BEARING | - | 87.313 mm | - | - | - | - | - | - |
| 32013 X P/6 | CONSOLIDATED BEARING | - | - | - | - | 46.93 mm | 66.675 mm | - | - |
| RMS-14 | CONSOLIDATED BEARING | - | - | - | - | - | - | - | - |
| 7212 BG | CONSOLIDATED BEARING | 22.3 mm | - | - | - | - | - | - | - |
| NATV-40 | CONSOLIDATED BEARING | - | - | - | - | - | - | - | - |
| 51116 | CONSOLIDATED BEARING | - | - | - | - | - | - | - | - |
| 31311 P/6 | CONSOLIDATED BEARING | - | - | - | - | - | - | - | - |
| K-35 X 42 X 22 | CONSOLIDATED BEARING | - | - | - | - | 62 mm | - | - | 46 mm |
| 1-1/2X1-9/16X1-1/4 | CONSOLIDATED BEARING | - | - | - | - | - | - | - | - |
| NJ-2236 M C/3 | CONSOLIDATED BEARING | 22.3 mm | - | - | - | - | - | - | - |
| NJ-426 M C/3 | CONSOLIDATED BEARING | - | - | - | - | - | - | - | - |
| NUTR-25 P/5 | CONSOLIDATED BEARING | - | - | - | - | - | - | - | - |
| 6213 T P/5 | CONSOLIDATED BEARING | - | - | - | - | - | - | - | - |
| 23034E-KM C/3 | CONSOLIDATED BEARING | - | - | - | - | - | - | - | - |
| N-207 M P/5 C/3 | CONSOLIDATED BEARING | - | - | - | - | - | - | - | - |
| NU-228E M C/3 | CONSOLIDATED BEARING | - | - | - | - | - | - | - | - |
| KA-35 ARO | CONSOLIDATED BEARING | - | - | - | - | - | - | 466.725 mm | - |
| 5208 NR | CONSOLIDATED BEARING | - | - | - | - | - | - | - | - |
| 53326-U | CONSOLIDATED BEARING | - | - | - | - | - | - | - | - |
| 22318 M F80 C/4 | CONSOLIDATED BEARING | - | - | - | - | - | - | - | - |
| W-1 5/8 | CONSOLIDATED BEARING | - | - | - | - | - | - | - | - |
| 22222E | CONSOLIDATED BEARING | - | - | - | - | - | - | - | - |
| 1209-K | CONSOLIDATED BEARING | - | - | - | - | - | - | 349.25 mm | - |
| CONSOLIDATED BEARING E-12 Single Row Ball Bearings | P90°:138 kN; Eye bolt:2 x 3/8-16 UNC; A2:238.125 mm; PosiTrac Plus contact element (dc shaft position):B10724-134; H:317.5 mm; H2:63.5 mm; dc:146.05 mm; Pa:43.2 kN; Housing:SAW 230; End plug (suffix Y):EPR 17; |
| CONSOLIDATED BEARING NUTR-25 P/5 Cam Follower and Track Roller - Yoke Type | Fillet Radius ra:0.30 mm; Accessories:Two Seals & Snap-Rin; Basic Dynamic Radial Load Rating C:4620 N; Oil Speed Rating Open/Shielded n2:36000 rpm; Basic Static Radial Load Rating Co:1960 N; d:10.000 mm; D:26.0000 mm; Sealed Speed Rating n3:19000 rpm; B:8.00 mm; Grease Speed Rating Open/Shielded n1:30000 rpm; |
| 7.087 Inch | 180 Millimeter x 17.323 Inch | 440 Millimeter x 3.74 Inch | 95 Millimeter CONSOLIDATED BEARING NU-436 M Cylindrical Roller Bearings | D:250.0000 mm; Fillet Radius rb:1.00 mm; Oil Speed Rating n2:2600 rpm; d:95.000 mm; Basic Static Radial Load Rating Co:510000 N; Fillet Radius ra:3.00 mm; B:110.00 mm; Basic Dynamic Radial Load Rating C:410000 N; Grease Speed Rating n1:2000 rpm; Size (mm):7.087 Inch | 180 Millimeter x 17.323 Inch | 440 Millimeter x 3.74 Inch | 95 Millimeter ; |
| CONSOLIDATED BEARING 29415 M Thrust Roller Bearing | Reference speed:630 r/min; H:60 mm; Shaft washer:WS 89330; Housing washer:GS 89330; Roller and cage thrust assembly:K 89330 M; d1:250 mm; Fatigue load limit Pu:285 kN; Da max.:162 mm; D1:154 mm; Basic static load rating C0:3250 kN; |
| CONSOLIDATED BEARING 6313-2RSNR C/3 Single Row Ball Bearings | Basic Dynamic Radial Load Rating C:307000 N; B:104.00 mm; Grease Speed Rating n1:2000 rpm; Basic Static Radial Load Rating Co:335000 N; Fillet Radius rb:1.00 mm; D:210.0000 mm; Fillet Radius ra:3.00 mm; Oil Speed Rating n2:2800 rpm; d:85.000 mm; |
| CONSOLIDATED BEARING I-71220 Self Aligning Ball Bearings | B2 B Dynamic (Cr):31.8 mm; B1:31 mm; D1:88.34 mm; Weight:0 min-1; D:120 mm; Oil:31.100 kN; Static (Cor):92 mm; d:74.6 mm; Pu:196 kN; Limiting speed for lubrication with:0 min-1; |
| 3.15 Inch | 80 Millimeter x 3.937 Inch | 100 Millimeter x 2.362 Inch | 60 Millimeter CONSOLIDATED BEARING RNAO-80 X 100 X 60 Needle Non Thrust Roller Bearings | Taconite seal:TER 138; J min.:492.125 mm; RG:3/4 NPT; R2:37.306 mm; Appropriate attachment bolt size G:1 in; H:360.363 mm; Cap bolt:4 x 3/4-10 UNC; P120°:85.9 kN; P180°:92.5 kN; A1:171.45 mm; Size (mm):3.15 Inch | 80 Millimeter x 3.937 Inch | 100 Millimeter x 2.362 Inch | 60 Millimeter ; |
| 1.102 Inch | 28 Millimeter x 1.299 Inch | 33 Millimeter x 0.512 Inch | 13 Millimeter CONSOLIDATED BEARING K-28 X 33 X 13 Needle Non Thrust Roller Bearings | Fillet Radius ra:2.50 mm; Basic Static Radial Load Rating Co:114000 N; d:75.000 mm; Grease Speed Rating Open/Shielded n1:3600 rpm; B:45.00 mm; Sealed Speed Rating n3:2500 rpm; D:190.0000 mm; Basic Dynamic Radial Load Rating C:153000 N; Accessories:Shield & Seal; Oil Speed Rating Open/Shielded n2:4300 rpm; Size (mm):1.102 Inch | 28 Millimeter x 1.299 Inch | 33 Millimeter x 0.512 Inch | 13 Millimeter ; |
| 3.5 Inch | 88.9 Millimeter x 4 Inch | 101.6 Millimeter x 0.25 Inch | 6.35 Millimeter CONSOLIDATED BEARING KA-35 ARO Angular Contact Ball Bearings | da:112.713 mm; Pa:24.9 kN; ba:57.944 mm; S:4.763 mm; P180°:151 kN; Da:230 mm; Mass pillow block:85.7 kg; Adapter sleeve assembly:SNW 26x4.7/16; L:466.725 mm; P90°:185 kN; Size (mm):3.5 Inch | 88.9 Millimeter x 4 Inch | 101.6 Millimeter x 0.25 Inch | 6.35 Millimeter ; |
| 1.772 Inch | 45 Millimeter x 3.346 Inch | 85 Millimeter x 0.748 Inch | 19 Millimeter CONSOLIDATED BEARING 20209-K Spherical Roller Bearings | Calculation factor Y2:2.5; K:9 mm; Fatigue load limit Pu:415 kN; Da max.:440 mm; Mass bearing:115 kg; Basic dynamic load rating C:3183 kN; Calculation factor Y0:1.6; b:16.7 mm; ra max.:4 mm; Calculation factor Y1:1.7; Size (mm):1.772 Inch | 45 Millimeter x 3.346 Inch | 85 Millimeter x 0.748 Inch | 19 Millimeter ; |
| CONSOLIDATED BEARING 6304 C/3 Single Row Ball Bearings | r5 min.:0.6 mm; Reference speed:4500 r/min; K:4.5 mm; Calculation factor Y2:3.3; Da max.:82 mm; da max.:64 mm; Limiting speed:7000 r/min; ra max.:1.5 mm; Basic dynamic load rating C:191 kN; D:90 mm; |
| 1.969 Inch | 50 Millimeter x 4.331 Inch | 110 Millimeter x 1.575 Inch | 40 Millimeter CONSOLIDATED BEARING NU-2310E M C/3 Cylindrical Roller Bearings | Oil Speed Rating n2:4500 rpm; Basic Dynamic Radial Load Rating C:134000 N; B:57.20 mm; D:130.0000 mm; Fillet Radius ra:2.00 mm; d:60.000 mm; Grease Speed Rating n1:3400 rpm; Basic Static Radial Load Rating Co:143000 N; Accessories:No Shield, no Seal,; Sealed Speed Rating n3:3400 rpm; Size (mm):1.969 Inch | 50 Millimeter x 4.331 Inch | 110 Millimeter x 1.575 Inch | 40 Millimeter ; |
| 3.74 Inch | 95 Millimeter x 5.118 Inch | 130 Millimeter x 2.48 Inch | 63 Millimeter CONSOLIDATED BEARING NA-6919 P/5 Needle Non Thrust Roller Bearings | Da:250 mm; P150°:105 kN; L:511.175 mm; Bearing:22228 CCK/W33; Housing:SSAFS 528; Initial grease fill:481.95 g; h:51.594 mm; Ca:77.8 mm; Cap bolt, SAE grade:8; Cap bolt recommended tightening torque:515.2 N·m; Size (mm):3.74 Inch | 95 Millimeter x 5.118 Inch | 130 Millimeter x 2.48 Inch | 63 Millimeter ; |
| 5.118 Inch | 130 Millimeter x 13.386 Inch | 340 Millimeter x 3.071 Inch | 78 Millimeter CONSOLIDATED BEARING NJ-426 M C/3 Cylindrical Roller Bearings | B:18.00 mm; Grease Speed Rating n1:6300 rpm; Oil Speed Rating n2:7500 rpm; Fillet Radius ra:1.00 mm; Basic Dynamic Radial Load Rating C:35800 N; Fillet Radius rb:0.60 mm; D:100.0000 mm; d:65.000 mm; Basic Static Radial Load Rating Co:32500 N; Size (mm):5.118 Inch | 130 Millimeter x 13.386 Inch | 340 Millimeter x 3.071 Inch | 78 Millimeter ; |
3.937 Inch | 100 Millimeter x 4.213 Inch | 107 Millimeter x 0.827 Inch | 21 Millimeter CONSOLIDATED BEARING K-100 X 107 X 21 Needle Non Thrust Roller Bearings Video