| 1.181 Inch | 30 Millimeter x 1.626 Inch | 41.3 Millimeter x 1.874 Inch | 47.6 Millimeter DODGE P2B-GTMAH-30M Pillow Block Bearings | Brand:JNS; Weight:0,027 Kg; Basic dynamic load rating (C):10,2 kN; Size (mm):1.181 Inch | 30 Millimeter x 1.626 Inch | 41.3 Millimeter x 1.874 Inch | 47.6 Millimeter ; Outer Diameter (mm):30; r min.:0,3 mm; C:13 mm; db:25,6 mm; Db:22,6 mm; D:30 mm; |
| DODGE WSTU-E-106R Take Up Unit Bearings | Width (mm):2,5; Size (mm):2.5x7x2.5; Brand:ISB; B:2,5 mm; Df:8,5 mm; r min.:0,15 mm; Outer Diameter (mm):7; Bore Diameter (mm):2,5; Bf:0,7 mm; d:2,5 mm; |
| DODGE WSTU-GTEZ-012-PCR Take Up Unit Bearings | T1:16,637 mm; Width (mm):30,924; Bore Diameter (mm):59,987; D:130,175 mm; B:30,924 mm; Brand:Timken; d:59,987 mm; R:3,5 mm; Size (mm):59.987x130.175x30.92; Bearing number:HM911244/HM911210-B; |
| DODGE F3R-IP-102LE Flange Block Bearings | Bearing number:CX651; Compatibility:TOYOTA / AVENSIS /; Brand:CX; |
| DODGE WSTU-SXR-55M Take Up Unit Bearings | m:0,73 kg / Weight; rmin:1,5 mm; Cur:2460 N / Fatigue lim; Brand:FAG; Da max:71 mm; B:34,9 mm; Outer Diameter (mm):80; α:30 ° / Angle; D:80 mm; Size (mm):35x80x34.9; |
| DODGE SFCN-IP-207RE Flange Block Bearings | ra1 (max):2.5 mm; Static Load Rating:236,000 N; ra (max):2.5 mm; Enclosure:Open; db (max):99 mm; Limiting Speed - Oil:4,300 rpm; D:180 mm; Limiting Speed - Grease:3,600 rpm; r1:3 mm; B:42 mm; |
| DODGE FC-IP-315R Flange Block Bearings | Bearing number:K60X65X20; Basic static load rating (C0):71,5 kN; T:20 mm; D:65 mm; Outer Diameter (mm):65; Width (mm):20; Weight:0,051 Kg; Bore Diameter (mm):60; d:60 mm; Size (mm):60x65x20; |
| DODGE B1U-C-115 Mounted Units & Inserts | Width (mm):12; Outer Diameter (mm):32; D:32 mm; Weight:50 Kg; B1:18.5 mm; S:4.5 mm; Basic dynamic load rating (C):5,6 kN; C:9 mm; B2:8.5 mm; r:0.5 mm; |
| DODGE F2B-SXR-100 Flange Block Bearings | Brand:AST; Dynamic Load Rating (Cr):9,217; Static Load Rating (Cor):13,712; Bearing Type:plain; Mis-alignment Angle (a deg.):9.5; Max. shaft corner radius, or 45 deg. chamfer (ch1):0.012; Outer Width (Bo):0.5000; Outer Dia (D):1.1875; Bearing number:GEFZ15T; Bore Diameter (mm):15,875; |
| 0.5 Inch | 12.7 Millimeter x 1.469 Inch | 37.3 Millimeter x 1.188 Inch | 30.175 Millimeter DODGE P2B-SXRU-008 Pillow Block Bearings | r2 min.:1,5 mm; D:100 mm; d:55 mm; Width (mm):25; Size (mm):0.5 Inch | 12.7 Millimeter x 1.469 Inch | 37.3 Millimeter x 1.188 Inch | 30.175 Millimeter ; r1 min.:1,5 mm; Brand:NKE; r4 min.:1,1 mm; C:25 mm; S:1,3 mm; |
| 1.438 Inch | 36.525 Millimeter x 2.531 Inch | 64.287 Millimeter x 1.875 Inch | 47.63 Millimeter DODGE SP2B-S2-107R Pillow Block Bearings | d1:380.00 mm; Taper:1:12; b:33 mm; Appropriate Withdrawal Nut No.:HM 3084; Weight:25.40 Kg; L:183.00 mm; Thread D12:Tr420x5; Appropriate Hydraulic Nut:HMV84; L11:193.00 mm; Size (mm):1.438 Inch | 36.525 Millimeter x 2.531 Inch | 64.287 Millimeter x 1.875 Inch | 47.63 Millimeter ; |
| DODGE P2B-LTB7-200 Mounted Units & Inserts | Limiting Speed - Grease:8,500 rpm; db (min):37 mm; D:72 mm; Static Load Rating:50,000 N; Fillet Radius/Chamfer:1.1 mm; r1:1.1 mm; ra (max):1 mm; B:19 mm; dc (min):44 mm; Dynamic Load Rating:53,000 N; |
| DODGE AN-GT-14-70M-D Mounted Units & Inserts | Limiting Speed - Grease:3,500 rpm; Dynamic Load Rating:102,000 N; Limiting Speed - Oil:4,700 rpm; d:90 mm; Fillet Radius/Chamfer:2 mm; Bore Type:Cylindrical Bore; r1:1 mm; Enclosure:Open; D:160 mm; Weight:2.520 kg; |
| 0.787 Inch | 20 Millimeter x 1.157 Inch | 29.4 Millimeter x 1.311 Inch | 33.3 Millimeter DODGE P2B-SC-20M Pillow Block Bearings | B:15 mm; D:52 mm; Brand:Timken; d:25 mm; Bore Diameter (mm):25; Bearing number:205WD; Size (mm):0.787 Inch | 20 Millimeter x 1.157 Inch | 29.4 Millimeter x 1.311 Inch | 33.3 Millimeter ; Outer Diameter (mm):52; Weight:0,141 Kg; Width (mm):15; |