| No. | Brand | S | R | K | d | e | T | h | E |
| RKS.162.16.1204 | SKF | - | - | - | - | - | - | - | - |
| A8-22E6 | Rotek | - | - | 12 mm | 260 mm | - | - | - | - |
| A10-35P1A | Rotek | - | - | - | - | - | - | - | - |
| RKS.161.14.0414 | SKF | - | - | - | 25 | - | - | - | - |
| RKS.121400202001 | SKF | - | - | - | - | - | - | - | - |
| RKS.060.25.1644 | SKF | - | - | - | - | - | - | - | - |
| RKS.160.14.0744 | SKF | - | - | - | - | - | - | - | - |
| RKS.220741 | SKF | - | - | - | - | - | - | - | - |
| R8-39N3 | Rotek | - | - | - | - | - | - | - | - |
| RKS.221300101001 | SKF | 0.794 mm | - | - | - | - | - | - | - |
| M6-35P1Z | Rotek | - | - | - | 100 | - | - | - | - |
| RKS.060.20.0744 | SKF | - | - | - | 101.6 mm | - | - | - | - |
| RKS.062.20.0544 | SKF | - | - | - | 509.948 | - | - | - | - |
| RKS.162.16.1534 | SKF | - | - | - | - | - | - | 25 mm | - |
| L6-16N9Z | Rotek | 4.763 mm | - | - | - | - | - | 54.769 mm | - |
| M4-30P4Z | Rotek | - | - | - | 7.938 | - | - | - | - |
| RKS.160.14.0644 | SKF | - | - | - | 90 mm | - | - | - | - |
| RKS.222605101001 | SKF | - | - | - | 60 | - | - | - | - |
| L6-25E9Z | Rotek | - | - | 3 mm | - | - | - | - | - |
| RKS.061.25.1534 | SKF | - | - | - | 35 mm | - | - | - | - |
| RKS. 211440101001 | SKF | - | - | 6 mm | 95 mm | - | 64 mm | - | - |
| RKS.221310101001 | SKF | - | - | - | - | - | - | 30.163 mm | - |
| RKS.061.20.0544 | SKF | - | - | - | 30 mm | - | - | - | - |
| M5-26P1 | Rotek | - | - | - | 150 | - | - | - | - |
| L6-29E9Z Rotek Slewing Ring Bearings | H:474.663 mm; P150°:145 kN; Bearing limiting speed:1600 r/min; S:4.763 mm; J1:133.35 mm; da:177.8 mm; L:831.85 mm; h:85.725 mm; P90°:254 kN; H1:241.3 mm; A1:222.25 mm; PG:1/4 NPT; Cap bolt recommended tightening torque:400 N·m; J max.:708.025 mm; P120°:160 kN; Mass pillow block:283 kg; Labyrinth ring:2 x LOR 156; Cap bolt, SAE grade:5; P180°:173 kN; ba:99.219 mm; |
| RKS.220841 SKF Slewing Ring Bearings | H1:88.9 mm; Cap bolt, SAE grade:8; dc:61.913 mm; da:65 mm; End plug (suffix Y):EPR 7; N1:22.225 mm; Cap bolt recommended tightening torque:298.3 N·m; R2:21.431 mm; L:330.2 mm; Ca:57.785 mm; Labyrinth ring (db shaft position):LOR 55; S:4.763 mm; Max. speed for PosiTrac Plus seal:1950 r/min; Stabilizing ring:SR-16-13; P120°:30.2 kN; Pa:20.5 kN; H2:31.75 mm; Housing:SAF 313; PosiTrac Plus contact element (db shaft position):B10724-53; |
| RKS.061.20.0944 SKF Slewing Ring Bearings | ra max.:2.5 mm; Limiting speed:480 r/min; d:630 mm; r1,2 min.:3 mm; Reference speed:240 r/min; H:73 mm; Basic static load rating C0:11200 kN; B:21.5 mm; Fatigue load limit Pu:695 kN; D:750 mm; D1:634 mm; d1:746 mm; da min.:720 mm; Basic dynamic load rating C:1630 kN; Da max.:660 mm; Mass bearing:62 kg; Minimum axial load factor A:10; |
| RKS.210641 SKF Slewing Ring Bearings | db max:52; KBRG:4162; da:51.5; C0:66.5; ra:1; Oil rpm:8000; DA_:11; Prod_Type3:CRB_SR_NUP; dc min:57; LangID:1; SBRG:2; D_:85; r1:1.1; yobi:NUP209ET; D_a max:78.5; TSR rpm:8500; mass:0.449; db min:51.5; Macha rpm:10000; hidYobi:NUP209ET; |
| RKS.062.20.0644 SKF Slewing Ring Bearings | a:18.5 mm; Attainable speed for grease lubrication:20000 r/min; Preload class B GB:180 N; r1,2 min.:1 mm; Static axial stiffness, preload class C:144 N/µm; da max.:43.2 mm; Preload class A GA:90 N; Number of balls z:16; Calculation factor f1:0.99; da min.:39.6 mm; d1:43.7 mm; db min.:39.6 mm; D2:55.57 mm; db max.:43.2 mm; Calculation factor f2C:1.05; Calculation factor f:1.06; Calculation factor fHC:1; |
| A14-31P3 Rotek Slewing Ring Bearings | r1,2 min.:5 mm; Fatigue load limit Pu:102 kN; da min.:581 mm; D1 ≈:486 mm; Minimum load factor A:220; Limiting speed:560 r/min; Mass bearing (including seat washer where applicable):130 kg; ra max.:4 mm; d1 ≈:644 mm; Basic static load rating C0:6550 kN; D:650 mm; H:135 mm; d:480 mm; Basic dynamic load rating C:995 kN; Reference speed:400 r/min; Da max.:549 mm; |
| A14-19P4 Rotek Slewing Ring Bearings | d:140; SBRG:19; Z_:26; KBRG:7214; C0:191; DI_:149.83; C_conv:129000; r:1.5; mass:3.26; 2B_:48; r1:1; LangID:1; SREX:0.065; fo:16.7; hidYobi:7928CDF; Prod_Type3:ACBB_SR_MM_DF; ALP21:15; hidTable:ecat_NSANGB; SRIX:0.065; db:149; |
| RKS.062.25.1534 SKF Slewing Ring Bearings | S:0.794 mm; Attachment bolt diameter G:22.225 mm; A1:122.237 mm; J:273.05 mm; A:88.9 mm; N1:23.813 mm; a:6.35 mm; L:320.278 mm; s:41.275 mm; A5:46.831 mm; A6:28.575 mm; da:101.6 mm; Mass bearing unit:24 kg; B:116.681 mm; d2:152.4 mm; A3:36.513 mm; Basic dynamic load rating C:311 kN; Limiting speed:700 r/min; |
| RKS.161.16.1754 SKF Slewing Ring Bearings | Basic static load rating C0:137 kN; rb max.:1 mm; Cb min.:5.5 mm; Dimension series:LM 710900; T:24 mm; Basic dynamic load rating C:122 kN; r3,4 min.:1 mm; Calculation factor e:0.46; d1 ≈:84.1 mm; Limiting speed:6000 r/min; Reference speed:5000 r/min; r1,2 min.:3 mm; B:23 mm; da max.:73 mm; Fatigue load limit Pu:16 kN; D:105 mm; Ca min.:4 mm; db min.:77.5 mm; C:18.5 mm; d:65 mm; |
| H7-38E1 Rotek Slewing Ring Bearings | d:25.4 mm; da min.:27.5 mm; M:2.5 mm; Specific static load factor K0:300 N/mm²; ra max.:0.3 mm; Design (sliding contact surface combination):Steel/steel; dk:36.5 mm; D:41.275 mm; b:3.2 mm; Mass plain bearing:0.12 kg; Sealing solution:Triple-lip seals; Basic dynamic load rating C:56 kN; Basic static load rating C0:166 kN; Specific dynamic load factor K:100 N/mm²; B:22.225 mm; r2 min.:1 mm; |
| RKS. 211430101001 SKF Slewing Ring Bearings | H1:241.3 mm; A2:311.15 mm; R1:130.175 mm; da:239.713 mm; RG:1 NPT; Max. speed for PosiTrac Plus seal:600 r/min; H:473.075 mm; R2:46.831 mm; P180°:285 kN; Labyrinth ring:2 x LOR 553; Ca:117.805 mm; Housing:SSAFS 052 KA; PG:1/4 NPT; Eye bolt:2 x 1/2-13 UNC; Cap bolt, SAE grade:8; Da:399.999 mm; End plug (suffix Y):X-5217-2; ba:96.838 mm; Cap bolt recommended tightening torque:4284.4 N·m; P150°:236 kN; |
| RKS.160.14.0544 SKF Slewing Ring Bearings | Calculation factor f2C:1.08; Calculation factor fHC:1.01; b:2 mm; Da max.:85.4 mm; Calculation factor (back-to-back, face-to-face) X2:0.67; Number of balls z:32; Preload class B GB:120 N; Calculation factor (back-to-back, face-to-face) Y2:1.41; r3,4 min.:0.3 mm; Db max.:88 mm; Calculation factor (single, tandem) Y0:0.38; d2:72.72 mm; d:65 mm; Calculation factor (back-to-back, face-to-face) Y0:0.76; |
RKS.901175101001 SKF Slewing Ring Bearings Video
SKF RKS.901175101001 SLEWING BRGS +420MM LSB
Free 2-day shipping. Buy SKF RKS.901175101001 SLEWING BRGS +420MM LSB FACTORY NEW at Walmart.com
RKS.901175101001 Four point contact ball slewing bearing
RIGIA specialized in SKF structure RKS.901175101001 bearing(four point contact ball slewing bearing, without gear teeth), RKS customized slewing bearing
Slewing bearings
RKS.162.14.1094 is the best choice; otherwise the four-point contact ball slewing bearing RKS.062.20.1094 is suitable for this task. ...... RKS.901175101001
RKS.901175101001 SKF • ABF Store
RKS.901175101001 SKF available at ABF.store ✓ Same-day shipment ✓ 8.000.000 bearings and electric motors ✓ Worldwide delivery ✓ Customer Service in 8
RKS.901175101001 SKF Slewing bearing with external gear
Quality Four point contact ball slewing bearing manufacturers & exporter - buy RKS.901175101001 SKF Slewing bearing with external gear ,868x1144x100 mm
SKF RKS.921150303001 cylindrical roller slewing bearings
SKF RKS.921150303001 cylindrical roller slewing bearings ... SKF RKS.921150303001 are customized single row crossed cylindrical ... RKS.901175101001