| L6-22N9ZD Rotek Slewing Ring Bearings | Recommended diameter for attachment bolts, inch G:0.5 in; Hexagonal key size for grub screw N:3.969 mm; Recommended tightening torque for grub screw:6.5 N·m; A5:31.5 mm; s1:30.2 mm; Mass bearing unit:2.35 kg; Thread grub screw G2:5/16-24 UNF; B:49.2 mm; Db2:100.1 mm; RG:1/4-28 UNF; Housing:FYWR 508 Y; Housing material:Stainless steel; Basic dynamic load rating C:26 kN; R1:26.7 mm; Fatigue load limit Pu:0.8 kN; |
| RKS.324012324001 SKF Slewing Ring Bearings | Calculation factor Y1:2.3; Reference speed:530 r/min; B:200 mm; d1:400 mm; Da max.:602 mm; K:12 mm; r1,2 min.:5 mm; D:620 mm; B2 ≈:252 mm; G:Tr 440x5; Basic static load rating C0:8300 kN; Limiting speed:900 r/min; ra max.:4 mm; G1:30 mm; B1:230 mm; Calculation factor Y0:2.2; Mass bearing + sleeve:230 kg; da min.:429 mm; Fatigue load limit Pu:585 kN; b:22.3 mm; |
| RKS.060.25.1534 SKF Slewing Ring Bearings | Mass bearing:150 kg; B:200 mm; D:500 mm; Fatigue load limit Pu:425 kN; Basic dynamic load rating C:2734 kN; Comparative radial load rating CF:680 kN; T:200 mm; d:305.07 mm; r3,4 min.:4.8 mm; Calculation factor Y0:0.8; r1,2 min.:6.4 mm; Basic static load rating C0:5200 kN; Comparative axial load rating CFa:582 kN; b:51.3 mm; d1 ≈:352 mm; Design variant/feature:TDIS/N; Thrust factor K:0.67; Calculation factor Y2:1.15; |
| RKS.220411 SKF Slewing Ring Bearings | Mass pillow block:96.3 kg; Pa:38.5 kN; da:138.113 mm; Stabilizing ring:SR-32-0; J max.:488.95 mm; PosiTrac Plus contact element:2 x B10724-130; J min.:441.325 mm; Cap bolt recommended tightening torque:203.4 N·m; N1:28.575 mm; Appropriate attachment bolt size G:1 in; Initial grease fill:793.8 g; RG:3/4 NPT; End plug (suffix Y):EPR 16; P120°:85.9 kN; PG:1/4 NPT; A2:222.25 mm; h:52.388 mm; |
| RKS.160.14.0544 SKF Slewing Ring Bearings | Calculation factor f2C:1.08; Calculation factor fHC:1.01; b:2 mm; Da max.:85.4 mm; Calculation factor (back-to-back, face-to-face) X2:0.67; Number of balls z:32; Preload class B GB:120 N; Calculation factor (back-to-back, face-to-face) Y2:1.41; r3,4 min.:0.3 mm; Db max.:88 mm; Calculation factor (single, tandem) Y0:0.38; d2:72.72 mm; d:65 mm; Calculation factor (back-to-back, face-to-face) Y0:0.76; |
| RKS.900155101001 SKF Slewing Ring Bearings | hidTable:ecat_NSCLDR; ra:1.5; mass:1.49; TSR rpm:7100; r:1.5; B_:36; KBRG:4155; d:45; C_conv:137000; rb:1.5; db min:53; DA_:15; D_a max:92; dd min:66; Prod_Type3:CRB_SR_NJ; dc min:60; da:53; Oil rpm:6700; SBRG:23; Z_:13; |
| RKS.222600101001 SKF Slewing Ring Bearings | r3,4 min.:1 mm; Basic static load rating C0:57 kN; Mass bearing:1.1 kg; Calculation factor A:0.017; Da max.:99 mm; Basic dynamic load rating C:83 kN; Fatigue load limit Pu:2.4 kN; ra max.:2 mm; D1 ≈:88.4 mm; Calculation factor e:0.68; Calculation factor Y0:0.76; d1 ≈:73.64 mm; Calculation factor X:0.41; B:27 mm; rb max.:1 mm; a:32 mm; Limiting speed:12000 r/min; D:110 mm; Calculation factor Y1:0.92; |
| RKS.162.14.0744 SKF Slewing Ring Bearings | D:80 mm; Coefficient of friction µ max.:0.1; Tolerance housing:H7; Permissible sliding velocity v max.:5 m/s; B:60 mm; Tolerance shaft:h8; Specific static load factor K0:20 N/mm²; Coefficient of friction µ min.:0.05; Mass bushing:0.44 kg; Specific dynamic load factor K:10 N/mm²; d:70 mm; Permissible sliding velocity v min.:0.25 m/s; |
| A12-34E2AG Rotek Slewing Ring Bearings | Basic static load rating C0:490 kN; h:265 mm; d2 max.:162 mm; α:6 °; d:70 mm; Mass rod end:10 kg; B:49 mm; dk:92 mm; r1 min.:1 mm; Basic dynamic load rating C:465 kN; C1 max.:43 mm; G:M 72x4; l7 min.:85 mm; l1 min.:132 mm; l2 max.:349 mm; Material constant KM:330; Specific dynamic load factor K:150 N/mm²; |
| L6-33P9Z Rotek Slewing Ring Bearings | α:124 °; Tolerance shaft:e7; Coefficient of friction µ max.:0.15; Permissible sliding velocity v min.:0 m/s; Coefficient of friction µ min.:0.08; d:230 mm; h:232.5 mm; Specific dynamic load factor K:25 N/mm²; Specific static load factor K0:45 N/mm²; Permissible sliding velocity v max.:0.5 m/s; D:250 mm; a:17.5 mm; Tolerance housing:H7; Mass bushing:23.2 kg; B:350 mm; |
| R8-30N3 Rotek Slewing Ring Bearings | Dw:3.5 mm; r2 max.:1 mm; Mass needle roller:2.63 g; r1,2 min.:0.3 mm; Lw:34.8 mm; r1 max.:0.8 mm; |
| R8-30E3 Rotek Slewing Ring Bearings | Calculation factor (back-to-back, face-to-face) Y2:1.41; Number of balls z:21; Static axial stiffness, preload class C:183 N/µm; Calculation factor f2B:1.03; rb max.:0.6 mm; a:22.2 mm; Calculation factor e:0.68; d1:55.7 mm; D:75 mm; ra max.:1 mm; Preload class A GA:110 N; Db max.:70.8 mm; Calculation factor (back-to-back, face-to-face) Y1:0.92; db min.:49.6 mm; Preload class B GB:330 N; d:45 mm; |