| W13-24P1 Rotek Slewing Ring Bearings | hidTable:ecat_NSANGB; SDM_:102.494; Oil rpm:4800; ao:37.2; D_a:118; SBRG:10; DA_:13.494; 2B_:44; r:1.1; SREX:0.05; ALP21:30; SRE:7.02; Z_:21; Prod_Type3:ACBB_SR_MM_DF; yobi:7016AWDF; LangID:1; DE_:116.066; rb:0.6; ALPHA_:30; C:89.5; |
| RKS.060.20.0544 SKF Slewing Ring Bearings | hidTable:ecat_NSRDGB; hidYobi:6008DDU; SRIX:0.02; SREN:-0.02; C0:11.5; GRS rpm:6000; da min:45; mass:0.19; D_a:63; SDM_:54.5; yobi:6008DDU; SBRG:10; Prod_Type3:DGBB_SR_DD; ra:1; SREX:0.02; LangID:1; C_conv:16800; da max:47.5; r:1; DI_:46.562; |
| RKS.162.16.1424 SKF Slewing Ring Bearings | R1:53.975 mm; ba:31.75 mm; P90°:50.7 kN; da:85 mm; P150°:28.5 kN; Max. speed for Taconite seal:775 r/min; P180°:34.7 kN; A1:88.9 mm; H2:31.75 mm; Cap bolt:2 x 5/8-11 UNC; Da:150 mm; h:36.513 mm; J max.:279.4 mm; Mass pillow block:15.9 kg; Appropriate attachment bolt size G:0.75 in; A2:198.438 mm; P60°:84.5 kN; Cap bolt recommended tightening torque:149.1 N·m; End plug (suffix Y):EPR 13; |
| M5-16P1Z Rotek Slewing Ring Bearings | P60°:345 kN; A1:158.75 mm; L:558.8 mm; P180°:145 kN; End plug (suffix Y):EPR 16; H:338.137 mm; Pa:38.5 kN; Eye bolt:2 x 3/8-16 UNC; Cap bolt:7/8-9 UNC; S:4.763 mm; Taconite seal:TER 129; A2:288.925 mm; R1:104.775 mm; Ca:89.789 mm; Initial grease fill:793.8 g; P90°:207 kN; h:51.594 mm; Cap bolt recommended tightening torque:813.5 N·m; da:136.525 mm; PG:1/4 NPT; |
| A8-25N2 Rotek Slewing Ring Bearings | r, r1,2 min.:0.3 mm; F:15 mm; B:12.5 mm; Mass inner ring:0.0061 kg; d:12 mm; |
| W13-38P1 Rotek Slewing Ring Bearings | rb:1; DI_:54.5; D_a max:78.5; da:51.5; SDM_:65.5; C:76; hidYobi:NUP2209EM; DE_:76.5; dc min:57; D_:85; TSR rpm:8500; d:45; dd min:61; ra:1; KBRG:4165; db min:51.5; Macha rpm:12000; Oil rpm:8500; DA_:11; C_conv:76000; |
| RKS.425060201001 SKF Slewing Ring Bearings | GRS rpm:3600; m0:0.5; C:60.5; hidTable:ecat_NSANGB; mass:0.954; C0:57; D_:90; KBRG:7331; C_conv:60500; da:57; ALP21:40; SREX:0.05; Oil rpm:5000; r:1.1; LangID:1; DE_:82.824; SBRG:2; r1:0.6; 2B_:40; SDM_:69.995; |
| A8-41E1 Rotek Slewing Ring Bearings | r1 min.:1 mm; d:70 mm; h:235 mm; Specific dynamic load factor K:300 N/mm²; l7 min.:85 mm; l2 max.:319 mm; C1 max.:43 mm; dk:92 mm; Basic static load rating C0:490 kN; G:M 56x4; l1 min.:125 mm; α:6 °; d2 max.:162 mm; B:49 mm; Basic dynamic load rating C:880 kN; Mass rod end:7.9 kg; |
| RKS.23 0741 SKF Slewing Ring Bearings | Basic dynamic load rating C:30.7 kN; A5:23.5 mm; Limiting speed:950 r/min; H:99.5 mm; Housing material:Composite; s1:25.9 mm; J min.:129 mm; Thread grub screw G2:M6; H1:49.2 mm; Fatigue load limit Pu:0.8 kN; A1:30 mm; Hexagonal key size for grub screw N:3 mm; Recommended diameter for attachment bolts, mm G:12 mm; Recommended tightening torque for grub screw:7.4 N·m; Recommended diameter for attachment bolts, inch G:0.5 in; |
| RKS.060.25.1754 SKF Slewing Ring Bearings | Grub (set) screw size:M5; Recommended grub screw tightening torque:4 N·m; Mass lock nut:0.016 kg; G:M 10x0.75; Axial static load carrying capacity:9.8 kN; b:3 mm; h:2 mm; d3:20 mm; d1:16 mm; Associated spanner:HN 0; B:9 mm; |
| M5-26P1 Rotek Slewing Ring Bearings | DA_:17.462; ALPHA_:25; mass:5.94; r:2; m0:0.698; hidTable:ecat_NSANGB; DE_:197503; ra:2; B_:28; C0:231; SRE:9.08; d:150; C:157; LangID:1; SDM_:179.969; hidYobi:7930A5DT; yobi:7930A5DT; 2B_:56; D_a:200; D_:210; |
| A12-32P2 Rotek Slewing Ring Bearings | Labyrinth ring (dc shaft position):LOR 160; Stabilizing ring:SR-38-32; H1:200.025 mm; Mass pillow block:213 kg; PosiTrac Plus contact element (dc shaft position):B10724-159; RG:1 NPT; ba:78.581 mm; Pa:104 kN; Cap bolt, SAE grade:8; End plug (suffix Y):EPR 21; PosiTrac Plus contact element (db shaft position):B10724-170; P90°:249 kN; Labyrinth ring (db shaft position):LOR 171; PG:1/4 NPT; A2:276.225 mm; |