| RKS.062.20.0414 SKF Slewing Ring Bearings | mass:37.2; C_conv:1020000; r1:4; TSR rpm:2200; ra:3; Oil rpm:2200; SDM_:222; db min:156; KBRG:4145; dc min:182; DI_:180; D_a max:284; rb:3; D_:300; C0:1380; Z_:14; hidTable:ecat_NSCLDR; Fw:180; C:1020; dd min:198; |
| A9-25N3 Rotek Slewing Ring Bearings | C:11.5 mm; d1 ≈:110 mm; H1:42 mm; Basic dynamic load rating C:101 kN; ra max.:1 mm; Fatigue load limit Pu:8.3 kN; s:41 mm; Mass bearing (including seat washer where applicable):1.71 kg; Limiting speed:3000 r/min; H:38.3 mm; da min.:90 mm; r1,2 min.:1.1 mm; D2:85 mm; D1 ≈:62 mm; Da max.:85 mm; Minimum load factor A:0.26; R:90 mm; d:60 mm; D:110 mm; D3:115 mm; |
| L9-42P9Z Rotek Slewing Ring Bearings | RG:1/4-28 UNF; J6:129 mm; J7:35.5 mm; J:111 mm; A:43 mm; N4:4 mm; Recommended diameter for attachment bolts, inch G:0.625 in; N:18 mm; A3:3.2 mm; Mass bearing unit:2.35 kg; A1:15 mm; L:143 mm; Thread grub screw G2:M10x1; Basic static load rating C0:23.2 kN; Housing:FY 510 M/VZ033; d:50 mm; Da:125.4 mm; Db2:118 mm; Recommended tightening torque for grub screw:16.5 N·m; Limiting speed:800 r/min; |
| M4-30P4 Rotek Slewing Ring Bearings | da:75 mm; P150°:25.4 kN; Labyrinth ring (db shaft position):LOR 79; PG:1/8 NPT; Initial grease fill:68.04 g; RG:1/4 NPT; dc:71.438 mm; Ca:37.008 mm; P90°:45.4 kN; Labyrinth ring (dc shaft position):LOR 46; A2:118.666 mm; H2:28.575 mm; P180°:30.2 kN; Cap bolt:2 x 1/2-13 UNC; R1:46.038 mm; Housing:SAF 215; ba:32.544 mm; J max.:244.475 mm; L:285.75 mm; H1:82.55 mm; |
| L6-22E9Z Rotek Slewing Ring Bearings | Eye bolt:2 x 1/2-13 UNC; Housing:SAF 538; Cap bolt:4 x 7/8-9 UNC; Stabilizing ring:SR-38-32; N1:34.925 mm; H2:79.375 mm; RG:1 NPT; Ca:101.803 mm; Max. speed for Taconite seal:440 r/min; Mass pillow block:170 kg; Cap bolt recommended tightening torque:271.2 N·m; R2:42.069 mm; h:61.913 mm; R1:120.65 mm; J1:114.3 mm; S:4.763 mm; J min.:549.275 mm; Initial grease fill:1672.65 g; P120°:107 kN; |
| RKS.162.14.0544 SKF Slewing Ring Bearings | C_conv:44500; SBRG:19; SRI:4.54; ALP21:25; D_a:104; SRIX:0.04; hidTable:ecat_NSANGB; Prod_Type3:ACBB_SR_MM_DT; r:1; SDM_:95.023; GRS rpm:5600; d:80; SREX:0.04; DE_:103.79; ra:1; Z_:25; ALPHA_:25; SRE:4.54; r1:0.6; B_:16; |
| M4-12P4 Rotek Slewing Ring Bearings | yobi:NUP2316EM; Z_:13; DE_:151; LangID:1; DA_:25; KBRG:4165; SDM_:126; Prod_Type3:CRB_SR_NUP; Macha rpm:6300; C:355; rb:2; da:91; hidTable:ecat_NSCLDR; db max:98; dd min:114; dc min:105; D_:170; DI_:101; d:80; B_:58; |
| RKS.061.25.1534 SKF Slewing Ring Bearings | d:35 mm; Mass adapter sleeve assembly:0.12 kg; B4:9 mm; d1:30.163 mm; B1:29 mm; G:M 35x1.5; B:8 mm; d3:52 mm; |
| RKS. 211430101001 SKF Slewing Ring Bearings | H1:241.3 mm; A2:311.15 mm; R1:130.175 mm; da:239.713 mm; RG:1 NPT; Max. speed for PosiTrac Plus seal:600 r/min; H:473.075 mm; R2:46.831 mm; P180°:285 kN; Labyrinth ring:2 x LOR 553; Ca:117.805 mm; Housing:SSAFS 052 KA; PG:1/4 NPT; Eye bolt:2 x 1/2-13 UNC; Cap bolt, SAE grade:8; Da:399.999 mm; End plug (suffix Y):X-5217-2; ba:96.838 mm; Cap bolt recommended tightening torque:4284.4 N·m; P150°:236 kN; |
| RKS.160.20.1904 SKF Slewing Ring Bearings | Basic dynamic load rating C:92.3 kN; Preload class C GC:1400 N; b:2.6 mm; Reference grease quantity Gref:20.4 cm³; Static axial stiffness, preload class A:152 N/µm; Preload class D GD:2800 N; Calculation factor fHC:1.04; r3,4 min.:0.6 mm; Basic static load rating C0:108 kN; C3:2.9 mm; Attainable speed for oil-air lubrication:13000 r/min; dn:149.5 mm; C2:5.6 mm; Ball diameter Dw:15.875 mm; |
| A10-32N1A Rotek Slewing Ring Bearings | J min.:571.5 mm; P90°:218 kN; h:69.85 mm; J max.:635 mm; Cap bolt recommended tightening torque:271.2 N·m; A1:203.2 mm; N1:34.925 mm; H:422.275 mm; R1:122.237 mm; Stabilizing ring:SR-40-34; S:4.763 mm; Cap bolt:4 x 7/8-9 UNC; P180°:145 kN; PG:1/4 NPT; Eye bolt:2 x 1/2-13 UNC; Housing:SAF 634; Labyrinth ring:2 x LOR 141; PosiTrac Plus contact element:2 x B10724-140; P60°:364 kN; H2:85.725 mm; |
| RKS.060.25.1314 SKF Slewing Ring Bearings | Material constant KM:330; l7 min.:24 mm; C1 max.:13.5 mm; l3 min.:30 mm; dk:29 mm; G:M 20x1.5; B:16 mm; w:24 mm; Basic dynamic load rating C:30 kN; Basic static load rating C0:57 kN; h1:77 mm; d:20 mm; Mass rod end:0.34 kg; d2 max.:54 mm; r1 min.:0.3 mm; Specific dynamic load factor K:100 N/mm²; l5 ≈:16 mm; l4 max.:106 mm; d4 ≈:28 mm; α:9 °; |