| L6-22N9Z Rotek Slewing Ring Bearings | Basic static load rating C0:90 kN; l7 min.:30 mm; l3 min.:36 mm; l5 ≈:18 mm; Mass rod end:0.65 kg; G:M 24x2; h1:94 mm; α:7 °; d:25 mm; Material constant KM:330; dk:35.5 mm; B:20 mm; w:30 mm; d2 max.:65 mm; Specific dynamic load factor K:100 N/mm²; Basic dynamic load rating C:48 kN; d4 ≈:35 mm; r1 min.:0.6 mm; C1 max.:18 mm; l4 max.:128 mm; |
| A12-27E3 Rotek Slewing Ring Bearings | B:16 mm; Static axial stiffness, preload class C:204 N/µm; Static axial stiffness, preload class A:104 N/µm; Db max.:70.8 mm; D:75 mm; Preload class B GB:330 N; Static axial stiffness, preload class B:156 N/µm; da max.:55.1 mm; Ball diameter Dw:7.144 mm; Calculation factor f2A:1; Da max.:70.4 mm; Calculation factor f:1.06; Preload class C GC:660 N; d1:55.7 mm; da min.:49.6 mm; Calculation factor (single, tandem) Y2:0.87; |
| M5-38P1Z Rotek Slewing Ring Bearings | Mass adapter sleeve assembly:5.4 kg; d3:200 mm; B:26 mm; G:M 170x3; B1:101 mm; Hydraulic nut:HMV 34 E; d:170 mm; B4:28.5 mm; d1:152.4 mm; |
| M5-22P1Z Rotek Slewing Ring Bearings | C:20 mm; da max.:34.4 mm; b1:3.9 mm; D:55 mm; r2 min.:1 mm; Lubricant:Regular relubricatio; d:30 mm; Da max.:50.9 mm; rb max.:1 mm; Basic static load rating C0:400 kN; r1 min.:0.6 mm; Basic dynamic load rating C:80 kN; Mass plain bearing:0.35 kg; da min.:33.7 mm; Da min.:48.5 mm; α:17 °; dk:47 mm; Design (sliding contact surface combination):Steel/steel; Sealing solution:Triple-lip seals; Material constant KM:330; |
| A14-18E1L Rotek Slewing Ring Bearings | H2:19 mm; Recommended tightening torque for grub screw:7.4 N·m; Housing material:Cast iron; Mass bearing unit:1.5 kg; Basic static load rating C0:15.3 kN; N4:4 mm; Thread grub screw G2:M6; J6:146 mm; Hexagonal key size for grub screw N:3 mm; B1:39.5 mm; H:93 mm; L:160 mm; H1:47.6 mm; Limiting speed:1100 r/min; J:126 mm; s1:24.3 mm; N:21 mm; J max.:133 mm; Recommended diameter for attachment bolts, mm G:12 mm; |
| R8-30E3 Rotek Slewing Ring Bearings | Calculation factor (back-to-back, face-to-face) Y2:1.41; Number of balls z:21; Static axial stiffness, preload class C:183 N/µm; Calculation factor f2B:1.03; rb max.:0.6 mm; a:22.2 mm; Calculation factor e:0.68; d1:55.7 mm; D:75 mm; ra max.:1 mm; Preload class A GA:110 N; Db max.:70.8 mm; Calculation factor (back-to-back, face-to-face) Y1:0.92; db min.:49.6 mm; Preload class B GB:330 N; d:45 mm; |
| L9-42P9Z Rotek Slewing Ring Bearings | RG:1/4-28 UNF; J6:129 mm; J7:35.5 mm; J:111 mm; A:43 mm; N4:4 mm; Recommended diameter for attachment bolts, inch G:0.625 in; N:18 mm; A3:3.2 mm; Mass bearing unit:2.35 kg; A1:15 mm; L:143 mm; Thread grub screw G2:M10x1; Basic static load rating C0:23.2 kN; Housing:FY 510 M/VZ033; d:50 mm; Da:125.4 mm; Db2:118 mm; Recommended tightening torque for grub screw:16.5 N·m; Limiting speed:800 r/min; |
| L6-25N9Z Rotek Slewing Ring Bearings | P90°:113 kN; h:56.356 mm; P180°:84.5 kN; P150°:68.1 kN; ba:56.356 mm; J min.:371.475 mm; Max. speed for Taconite seal:590 r/min; R1:79.375 mm; J1:82.55 mm; H:287.337 mm; RG:1/2 NPT; Pa:25.4 kN; Ca:75.616 mm; Taconite seal:TER 125; P60°:189 kN; Housing:SAF 030 KA; A1:133.35 mm; Cap bolt recommended tightening torque:1220 N·m; L:466.725 mm; Appropriate attachment bolt size G:0.875 in; |
| A6-14P3D Rotek Slewing Ring Bearings | d:180; r1:1.5; ALP21:30; D_b:371; SREX:0.21; yobi:7336ADB; Oil rpm:1600; SRE:29.72; DA_:57.15; 2B_:150; ao:236.6; da:198; SBRG:3; SDM_:279.981; LangID:1; mass:84.2; SRIX:0.21; C:665; GRS rpm:1200; hidYobi:7336ADB; |
| A9-25N3 Rotek Slewing Ring Bearings | C:11.5 mm; d1 ≈:110 mm; H1:42 mm; Basic dynamic load rating C:101 kN; ra max.:1 mm; Fatigue load limit Pu:8.3 kN; s:41 mm; Mass bearing (including seat washer where applicable):1.71 kg; Limiting speed:3000 r/min; H:38.3 mm; da min.:90 mm; r1,2 min.:1.1 mm; D2:85 mm; D1 ≈:62 mm; Da max.:85 mm; Minimum load factor A:0.26; R:90 mm; d:60 mm; D:110 mm; D3:115 mm; |
| RKS. 212600101001 SKF Slewing Ring Bearings | d1:222 mm; B:10 mm; d:180 mm; r1,2 min.:1.1 mm; Mass shaft washer:1.12 kg; |
| L6-16N9Z Rotek Slewing Ring Bearings | N1:28.575 mm; P180°:113 kN; A2:247.65 mm; Mass pillow block:157 kg; h:54.769 mm; L:628.65 mm; R2:37.306 mm; A1:171.45 mm; da:170 mm; H2:69.85 mm; Eye bolt:2 x 3/8-16 UNC; H:360.363 mm; P120°:127 kN; Cap bolt recommended tightening torque:1220 N·m; S:4.763 mm; PosiTrac Plus contact element (dc shaft position):B10724-148; P60°:345 kN; Appropriate attachment bolt size G:1 in; db:188.912 mm; |