| A12-18E5 Rotek Slewing Ring Bearings | M:4 mm; Basic dynamic load rating C:245 kN; da max.:66.8 mm; b1:6.2 mm; Sealing solution:Triple-lip seals; Lubricant:Regular relubricatio; Design (sliding contact surface combination):Steel/steel, heavy-d; ra max.:1 mm; Mass plain bearing:1.1 kg; Da max.:84.2 mm; dk:80 mm; d:60 mm; Specific static load factor K0:500 N/mm²; Da min.:79.7 mm; Basic static load rating C0:1220 kN; b:6.2 mm; Material constant KM:330; |
| L4-17P8ZD Rotek Slewing Ring Bearings | J1:53.975 mm; Housing:FSAF 613; Da:140 mm; Taconite seal:TER 32; Appropriate attachment bolt size G:0.625 in; R1:46.038 mm; P150°:19.6 kN; S:4.763 mm; H:167.481 mm; End plug (suffix Y):EPR 7; Max. speed for Taconite seal:1400 r/min; P120°:21.8 kN; Cap bolt, SAE grade:8; Ca:57.785 mm; da:55.563 mm; H1:88.9 mm; P90°:36 kN; PG:1/8 NPT; L:330.2 mm; Cap bolt recommended tightening torque:298.3 N·m; |
| L6-37P9ZD Rotek Slewing Ring Bearings | L1:76 mm; Basic static load rating C0:11.2 kN; Fatigue load limit Pu:0.475 kN; L:83 mm; A1:13.3 mm; H:138 mm; H1:52.4 mm; T:41.5 mm; A5:26.9 mm; Hexagonal key size for grub screw N:3.175 mm; d:30.162 mm; Recommended tightening torque for grub screw:4 N·m; N:10.7 mm; s1:22.2 mm; Thread grub screw G2:1/4-28 UNF; J:47.6 mm; Housing material:Composite for food a; Basic dynamic load rating C:16.3 kN; |
| RKS.425060201001 SKF Slewing Ring Bearings | GRS rpm:3600; m0:0.5; C:60.5; hidTable:ecat_NSANGB; mass:0.954; C0:57; D_:90; KBRG:7331; C_conv:60500; da:57; ALP21:40; SREX:0.05; Oil rpm:5000; r:1.1; LangID:1; DE_:82.824; SBRG:2; r1:0.6; 2B_:40; SDM_:69.995; |
| R8-30N3 Rotek Slewing Ring Bearings | Dw:3.5 mm; r2 max.:1 mm; Mass needle roller:2.63 g; r1,2 min.:0.3 mm; Lw:34.8 mm; r1 max.:0.8 mm; |
| RKS.061.25.1204 SKF Slewing Ring Bearings | hidYobi:FYCR-12; hidTable:ecat_NSRF; C:12.6; yobi:FYCR-12; mass:0.076; KBRG:8550; Z_:28; C0:21; r:0.6; DI_:17; F:19; DA_:2.14; SLR:9.8; C_:14; B_:15; T:8050; D_:32; DE_:21.28; d:12; Prod_Type3:NRB_RF_FYCR; |
| L6-29P9Z Rotek Slewing Ring Bearings | G1:13 mm; da max.:152 mm; r1,2 min.:2 mm; Da max.:170 mm; Basic dynamic load rating C:530 kN; Mass bearing + sleeve:6.2 kg; B2 ≈:82 mm; da min.:124.6 mm; D1 ≈:164 mm; ra max.:2 mm; D:180 mm; Fatigue load limit Pu:91.5 kN; Basic static load rating C0:880 kN; B:60 mm; d1:115 mm; G:M 125x2; Operating clearance factor k2:0.103; s2 max.:5.2 mm; B1:73 mm; Limiting speed:1100 r/min; |
| RKS.060.25.1644 SKF Slewing Ring Bearings | hidTable:ecat_NSCLDR; DA_:34; SBRG:22; C_conv:810000; C:810; LangID:1; rb:2.5; Z_:18; Macha rpm:3600; DI_:193; r1:3; GRS rpm:1900; db max:188; Prod_Type3:CRB_SR_NU; TSR rpm:2400; D_a max:277; D_:290; yobi:NU2232EM; dd min:210; DE_:261; |
| RKS.061.30.1904 SKF Slewing Ring Bearings | Housing:SAF 620; P90°:111 kN; A1:120.65 mm; L:419.1 mm; Max. speed for Taconite seal:900 r/min; da:85.725 mm; Ca:82.804 mm; Cap bolt recommended tightening torque:1220 N·m; R2:30.163 mm; P180°:81.4 kN; S:4.763 mm; J1:69.85 mm; J max.:368.3 mm; Initial grease fill:379.89 g; PG:1/4 NPT; P60°:185 kN; H2:53.975 mm; h:51.594 mm; P150°:66.7 kN; Appropriate attachment bolt size G:0.75 in; |
| RKS.160.14.0744 SKF Slewing Ring Bearings | Calculation factor f0:8.4; D:120 mm; rb max.:0.6 mm; Basic static load rating C0:23.2 kN; Calculation factor f2B:1.05; Calculation factor f:1.16; Number of balls z:23; Static axial stiffness, preload class B:109 N/µm; Calculation factor f2C:1.09; d1:96 mm; Calculation factor fHC:1.01; da min.:91 mm; Preload class C GC:957 N; ra max.:1 mm; Reference grease quantity Gref:7 cm³; B:18 mm; Basic dynamic load rating C:29.6 kN; |
| VSI201094-N INA Slewing Ring Bearings | Maximum tractor speed max.:90 km/h; Recommended minimum temperature min.:-20 °C; Flange design:Flange with metric a; Minimum rotational disc speed min.:90 r/min; D:117 mm; Corrosion protection:Zinc-coated housing; J:98 mm; GS:M24x2; Mass:2.2 kg; Minimum disc diameter min.:300 mm; Recommended tightening torque for self-locking shaft nut:300 N·m; Recommended lower temperature limit for storage (static):-50 °C; |
| RKS.210411 SKF Slewing Ring Bearings | Coefficient of friction µ min.:0.05; Mass bushing:0.012 kg; Permissible sliding velocity v max.:5 m/s; Specific dynamic load factor K:10 N/mm²; D:16 mm; d:12 mm; B:20 mm; Specific static load factor K0:20 N/mm²; Coefficient of friction µ max.:0.1; Tolerance housing:H7; Tolerance shaft:h8; Permissible sliding velocity v min.:0.25 m/s; |